Airsoft M4 to Ak Mag Adapter

Airsoft M4 Adapter For AK Mag

thingiverse

Made a airsoft M4/M16/AR AEG adapter to fit AK AEG magazines. I uploaded two different version, both are practically the aforementioned except for i is a tighter fit for AK mags. My CYMA AK mag fits perfectly in the standard version but the JG AK mag is very...

Airsoft AK Adapter For M4 Mag

thingiverse

Made a airsoft AK AEG adapter for M4/M16/AR AEG type magazines. Print upside down with supports. Made a new version that has two parts and needs a spring from a retractable pen to work. ... Like the first version print the chief body A office upside downward...

Airsoft L96 Magazine Adapter For M4 Mags

thingiverse

Fabricated a magazine adapter for L96 blazon airsoft spring rifles to utilize M4 mags. Information technology was sort of a request and I had already washed some work on it before. Impress with supports enabled and be careful cleaning out the back up structure on the mag release to non...

Airsoft AK-M4 adapter

thingiverse

This is everything you need to print for my solution of the AK adapters thin M4 magwell and latch issues. Taken from the Aug-M4 adapter and shortened to conserve material. Big thank you to both of the prior designers, my team is gonna love these!

Drum mag for AK (airsoft)

thingiverse

Электродетали - https://www.thingiverse.com/thing:4300274 Запчасти на бубен для AR - https://www.thingiverse.com/thing:4196626 Ссылка на видео по сборке / Link to associates video: https://youtu.be/4YtM2BJzcPY Сборка электробубна / Assembling of the...

AK / MP5 Adapter for M4 BB loader (airsoft)

thingiverse

AK / MP5 Adapter for M4 BB loader (airsoft) Adaptateur pour chargeur AK / MP5, pour les BB loader M4

Airsoft p90 - m4 mag adapter

thingiverse

employ V3 also added pin for latch this is an adapter for a p90 mag to m4 magazine. i am using a CYMA p90 but this is modelled off a standard p90 mid cap then should fit any. chief body print time is around 13 hours. everything is 3d printed including spring...

Airsoft G36 to AK Magazine Adapter

thingiverse

Made a mag well adapter for a airsoft G36 to use AK mags. Print with supports enabled.The AK mag should latch in like in a regular airsoft AK. Making the design was easy and quick, since I already had the design to work with M4 mags and had only...

Airsoft Ak To MP5 Mag Adapter

thingiverse

Made a airsoft magazine adapter for a ak to have mp5 mags. I plant someone talking nearly it on the airsoft group and with my experience making airsoft magazine adapters it didn't sound as well hard. Print the chief body of the adapter with supports enabled, 10%...

airsoft dual mag m4

thingiverse

airsoft dual mag M4

Airsoft M4 mag stand

thingiverse

Airsoft M4 mag stand

Airsoft M4 mag filler

pinshape

Airsoft M4 Mag filler

Airsoft AK mag catch

thingiverse

... ... Instructions Print as-is, you shouldn't need a support structure. I glued mine onto my mags, might exist a tight fit. Original file from:http://grabcad.com/library/airsoft-ak-mag-release-catch-one

Scorpion Evo to M4 Mag adapter (airsoft)

thingiverse

this is my scorpion evo to m4 mag adapter for airsoft, might need some more tweaking but this one should piece of work and lock in properly. the m4 department and magazine lock are taken from the aug to m4 projection (https://www.thingiverse.com/matter:1478821) this...

Airsoft G36 to M4 Magazine Adapter

thingiverse

Made a mag adapter for airsoft G36 and SL9 to work with M4 magazines. Print with supports enabled. There shouldn't be any back up structure in the feed tube.The support construction around the mag release can be difficult to remove, don't cutting the pivot...

Airsoft VSR-ten to M4 Mag Adapter

thingiverse

Hardware ==================== -3d printer bed leveling spring (~8.15mm diameter and 21mm alpine) -M5x40mm screw -M5 t-slot or 5-slot nut Edits fabricated ==================== -Removed large portions of the original adaptor -edited spring hole size -changed...

Airsoft VSR10 To M4 Magazine Adapter

thingiverse

Fabricated a VSR10 to M4 magazine adapter. I've had a couple of requests for i. Print with supports enabled and watch out to not cut the pivot point when removing the support structure on the mag release part. ...I used a spring from a pen and cutting it in...

Amoeba Stryker to M4 Airsoft Mag Adapter

thingiverse

... This is a work in progress, will need some refining I'm sure. Uses a standard AR Magazine release to hold the M4 mag in place. EDIT. made some aesthetic changes, lengthened the magwell for the M4 mags to allow a more than secure fit. ...V14 is Electric current

Airsoft AK Magazine Clip

thingiverse

Replacement magazine clip for AK/RPK metal magazines. Impress WITH Potent Cloth! Volition Suspension FAST! USED TO Concur MAGS IN THE GUN! Print in mm. 100% INFILL NEEDED! X: 21mm Y: 16mm Z: 17mm Please tell me what yous call back. ...

Airsoft M4 Mag Extension

thingiverse

Had a asking for a airsoft AEG M4 magazine extension. It merely works on AEG M4 blazon airsoft, it will not work with a airsoft M4 GBBR. It might be tight in the mag well and adapter on the magazine. ...The print settings I used, ABS, 0.3 mm layer peak, 2 shells,...

Airsoft M4 Magazine Funnel

thingiverse

Remix of the M4 airsoft mag funnel that did non accept the hole cut out. ...Added the pigsty.

Airsoft M4 Magazine Adapter for G36 Variants for TM-JG replicas 3D impress model

cults3d

M4 Mag adapter for TM and JG airsoft AEG's.

Airsoft M4 Mag Adapter for G36 Variants for TM-JG replicas 3D print model

cgtrader

M4 Magazine adapter for TM and JG airsoft toys. ...

W&S AIRSOFT FOR WETECH AK Magazine SHEEL

thingiverse

AIRSOFT WETECH AK Magazine SHEEL

Airsoft MP5 Adapter For AK Mags

thingiverse

Made a adapter for a airsoft MP5 to use AK mags. I fabricated it considering I simply have one MP5 midcap mag and many AK mags. Print with supports enabled. ...The part that holds the mag in should flex and not might break.

Airsoft M4 mag assist

thingiverse

A simple M4 mag assist i made for some mid caps I have. I cant hope information technology will work with all magazines simply y'all tin can wrap tape around the magazine if its too big. I've uploaded both the STL file and an inventor part file in example anyone wishes to remix the...